SIZE48 cm (19.0")
RESOLUTION1280 x 1024 (5:4 aspect ratio)
DISPLAY COLORS8-bit colors: 16.77 million colors
The SCD 19102 produces color and gray scale images for the accurate, high-speed presentation of motion studies and dynamic images in endoscopy, surgery, cardiac imaging, and ultrasound. Like all displays from EIZO, the device is pre-calibrated in the factory. The five integrated look-up tables (LUTs) loaded with practice-oriented settings of high image quality are stored in the display enabling the use of standard graphics boards. The display can be set and re-calibrated in the field in accordance with the CIE or DICOM (Digital Imaging and Communications in Medicine) standard.
Wide viewing angles allow the monitor to be viewed from the side with minimal color shift, thus offering a quality image to multiple persons watching from different perspectives simultaneously.
To ensure the most accurate and consistent images possible, EIZO carefully measures and sets every tone on the production line to offer image quality tailored specifically to medical needs like DICOM Part 14 or gamma 2.2.
EIZO's fully automated stability function makes use of an internal backlight sensor to quickly stabilize the brightness level at startup and to compensate for fluctuations caused by variations in ambient temperature and the passage of time.
EIZO offers multiple input signals to allow connections with both legacy and state-of-the-art endoscopic systems without the need of other optional devices or costs. With loop-through output support, the monitors are also ideally suited for multi-monitor integration or archiving in the operating room.
To minimize motion artifacts that normally occur during interlace/progressive (I/P) conversion, this model detects the amount of change between images over time and applies the ideal amount of correction.
With its compact size and VESA mount compatibility, the 19-inch color monitor serve as efficient alternative for use in environments with limited space.
By utilizing an energy-efficient LED as a backlight, the monitor achieves a high-brightness and low power consumption at the same time. Unlike conventional CCFL backlights, LED backlights deteriorate more slowly and thus the monitor offers a longer service life. Since the LED backlight is mercury free, it will reduce any potential impact on the environment when it is disposed of.
VESA compliance to be attached to existing mounting accessories.
The monitor meets the strictest medical, safety, and EMC emission standards.
The panel protector secures the screens from scratches, damages and liquids and alleviates cleaning and disinfection of the front surface.
|Model Variations||SCD 19102 D: With Stand
SCD 19102 C: Without Stand
SCD 19102 CP: Without Stand, with Panel Protector
|Certifications & Standards (Please contact EIZO for the latest information.)||CE (Medical Device Directive), IEC/EN60601-1 (2nd edition), IEC/EN60601-1 (3rd edition), CAN/CSA C22.2 No. 601.1-M90, CAN/CSA C22.2 No. 60601-1-08, GB4943.1 (non-tropical, altitude<2000 m), UL60601-1, FCC-A, RCM, RoHS, China RoHS, WEEE, CCC|
|Supplied Accessories||AC power cord, signal cables (DVI-D - DVI-D, BNC - D-Sub mini 15 pin), Utility Disk (PDF Instructions for Use)|
|Type||Color TFT LCD Panel (IPS)|
|Size||48 cm / 19" (481 mm diagonal)|
|Native Resolution||1280 x 1024 (5:4 aspect ratio)|
|Viewable Image Size (H x V)||376.0 x 301.0 mm|
|Pixel Pitch||0.294 x 0.294 mm|
|Display Colors||8-bit colors: 16.77 million colors|
|Viewing Angles (H / V, typical)||170° / 170°|
|Brightness (typical)||330 cd/㎡|
|Contrast Ratio (typical)||900:1|
|Response Time (typical)||18 ms (On/Off)|
|Input Terminals||BNC (Composite) x 1, DVI-I x 1, D-Sub mini 15 pin (Separate Sync, Composite Sync, SoG) x 1, S-Video x 1|
|Digital Scanning Frequency (H / V)||31 - 100 kHz / 48 - 85 Hz|
|Analog Scanning Frequency (H / V)||24 - 100 kHz / 48 -120 Hz|
|Power Requirements||AC 100 - 240 V: 50 / 60 Hz|
|Maximum Power Consumption||58 W|
|Power Save Mode||Less than 8 W|
|Power Management||Digital: DVI DMPM, Analog: VESA DPM|
|OSD Languages||English, German|
|Degree of Protection||SCD 19102 D, SCD 19102 C: IP20, SCD 19102 CP: IP22 for front, IP20|
|Net Weight||SCD 19102 D: 9.7 kg|
|Net Weight (Without Stand)||SCD 19102 C: 4.7 kg, SCD 19102 CP: 5.3 kg|
|Hole Spacing (VESA Standard)||100 x 100 mm, M4, depth 7 - 9 mm|